A.2. Login
For administration of username and password, see also A. 4. User Management.
If you experience problems with logging in to the webserver after a firmware update, perform a factory reset.
TM074522
Login
Object Description
Username
Enter username.
Default: admin.
Password
Enter password. Default: Grundfos.
After the first log in, you are forced to change the password. The password must contain:
• at least 8 and maximum 20 characters
• at least one lower case letter
• at least one upper case letter
• at least one numeric or special character.
When logging in, you have four attempts before a back-off algorithm starts an exponentially increasing time delay
between each attempt. Power cycling CIM 500 resets the back-off algorithm.
Related information
A.4. User Management
54
Appendix A
To Next Page
Loading...
