A.4. User Management
A login is required for any change of the CIM 500 settings, and this web page is used to configure the username and password.
It is only possible to configure one user.
TM074527
User management
Related information
A.2. Login
A.5. Update
You can update the firmware by means of the built-in webserver. The binary file is supplied by Grundfos.
To make installation and configuration easier, you can upload the configuration to a PC for backup or distribution to multiple modules.
If you experience problems with logging in to the webserver after a firmware update, perform a factory reset.
TM074526
Update
56
Appendix A
To Next Page
Loading...
