Need help?Do you have a question about the Grundfos CM 25 and is the answer not in the manual?
General| Model | CM 25 |
|---|---|
| Frequency | 50/60 Hz |
| Maximum operating pressure | 10 bar |
| Power | 0.37 - 1.5 kW |
| Material | Stainless steel |
| Approvals | CE |
| Pump housing | Stainless steel (EN 1.4301/AISI 304 or EN 1.4404/AISI 316L depending on the model) |
| Impeller | Stainless steel (EN 1.4301/AISI 304 or EN 1.4404/AISI 316L depending on the model) |
| Max Flow Rate | 6 m³/h |
| Max Head | 50 m |
| Housing Material | Stainless steel (EN 1.4301/AISI 304 or EN 1.4404/AISI 316L depending on the model) |
| Impeller Material | Stainless steel (EN 1.4301/AISI 304 or EN 1.4404/AISI 316L depending on the model) |
Guidance on mounting the pump on a flat surface.
Recommendations for connecting suction and discharge pipes.
Requirements for the power supply cable specification.
To Next Page
