EasyManua.ls Logo

Grundfos CM - Product Handling and Disposal Safety; Liquid Filling and Maintenance Safety; Product Decommissioning and Disposal

Grundfos CM
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Liquid filling
Liquid filling
CAUTION
Hot or cold liquid
Minor or moderate personal injury
Wear personal protective equipment.
Pay attention to the direction of the
vent hole when you fill the pump with
liquid and vent it.
Make sure that no persons are hurt by
the escaping liquid.
Maintaining the product
DANGER
Electric shock
Death or serious personal injury
Before starting any work on the prod-
uct, make sure that the power supply
has been switched off and that it can-
not be accidentally switched on.
WARNING
Corrosive liquids
Death or serious personal injury
Wear personal protective equipment.
WARNING
Toxic liquids
Death or serious personal injury
Wear personal protective equipment.
CAUTION
Hot or cold liquid
Minor or moderate personal injury
Wear personal protective equipment.
CAUTION
Back injury
Minor or moderate personal injury
Use lifting equipment which is ap-
proved for the weight of the product.
Use a lifting method suitable for the
weight of the product.
Wear personal protective equipment.
Contaminated products
CAUTION
Biological hazard
Minor or moderate personal injury
Flush the product thoroughly with clean
water and rinse the product parts in
water after dismantling
Taking the product permanently out of operation
WARNING
Corrosive liquids
Death or serious personal injury
Wear personal protective equipment.
WARNING
Toxic liquids
Death or serious personal injury
Wear personal protective equipment.
CAUTION
Hot or cold liquid
Minor or moderate personal injury
Wear personal protective equipment.
CAUTION
Back injury
Minor or moderate personal injury
Use lifting equipment which is ap-
proved for the weight of the product.
Use a lifting method suitable for the
weight of the product.
Wear personal protective equipment.
Disposing of the product
This product or parts of it must be disposed of in an
environmentally sound way.
1. Use the public or private waste collection service.
2. If this is not possible, contact the nearest
Grundfos company or service workshop.
The crossed-out wheelie bin symbol
on a product means that it must be
disposed of separately from household
waste. When a product marked with
this symbol reaches its end of life, take
it to a collection point designated by
the local waste disposal authorities.
The separate collection and recycling
of such products will help protect the
environment and human health.
6
English (GB)

Other manuals for Grundfos CM

Related product manuals