Need help?Do you have a question about the Grundfos CMBE and is the answer not in the manual?
General| Flow Rate | Up to 6 m³/h |
|---|---|
| Material | Stainless Steel |
| Motor Type | Permanent magnet motor |
| Liquid Temperature | 0°C to +60°C |
| Maximum Operating Pressure | 10 bar |
| Enclosure Class | IP55 |
| Frequency | 50 / 60 Hz |
| Pump Type | Centrifugal pump |
| Power Supply | 1 x 200-240 V |
| Control | Integrated Frequency Converter |
| Max Head | 60 m |
| Seal Type | Mechanical seal |
| Motor Power | 0.3 - 1.5 kW |
Details hazard symbols and statements used throughout the manual.
Covers DANGER, WARNING, CAUTION for mechanical setup risks.
Details electrical safety hazards and precautions for connections.
Instructions for checking and adjusting the precharge pressure in the diaphragm tank.
Guidelines on selecting appropriate cable cross-sections and conductors.
Steps for opening valves, switching on power, and initiating pump operation.
Explains how the integrated speed controller maintains constant pressure.
Describes the automatic pump stop mechanism to prevent dry running damage.
Details the adjustable pressure switch for inlet pressure protection.
Instructions on how to set the desired operating pressure for the pump.
Troubleshooting steps when the pump is not running and no lights are on Grundfos Eye.
Troubleshooting steps for when the pump is stopped with flashing alarm lights.
To Next Page
