Need help?Do you have a question about the Grundfos CMBE 3-62 and is the answer not in the manual?
General| Power Supply | 1 x 200-240V |
|---|---|
| Frequency | 50/60 Hz |
| Maximum Head | 62 m |
| Inlet/Outlet Size | 1 inch |
| Material | Stainless Steel |
| Protection Class | IP55 |
| System Pressure | 10 bar |
| Liquid Temperature Range | 0°C to +60°C |
| Approvals | CE, EAC |
| Motor Type | Permanent Magnet Motor |
| Seal Type | Carbon/Ceramic |
Symbols and hazard statements appearing in Grundfos instructions.
Safety warnings for mechanical installation, including electrical shock and physical hazards.
Safety warnings for electrical connections and wiring.
Safety warnings for starting up and servicing the pump.
Safety warnings for fault finding and taking the product out of operation.
Details on analog inputs, digital inputs/outputs, and GENIbus connections.
Detailed listing of terminal functions for inputs and outputs on the FM 200 module.
Procedure for flushing the system before operation, including hygiene considerations.
Explanation of automatic pump shutdown during dry running.
Details on the pressure switch function and its adjustment for dry-running protection.
To Next Page