Grundfos CMBE 10-54 - User Manual

CMBE
Installation and operating instructions
GRUNDFOS INSTRUCTIONS

Grundfos CMBE 10-54 Specifications

General

Maximum Operating Pressure	10 bar
Enclosure Class	IP55
Pump Housing	Stainless Steel
Mains Frequency	50 Hz
Maximum System Pressure	10 bar
Frequency	50 Hz
Max Head	54 m
Approvals	CE
Inlet Connection	Flanged
Outlet Connection	Flanged
Material	Stainless steel
Model	CMBE 10-54

Summary

1. General Information

1.1 Hazard statements

Details safety symbols and their meanings including DANGER, WARNING, CAUTION, and SIGNAL WORD.

2. Safety instructions

3. Intended use

5. Mechanical installation

6. Electrical connection

7. Starting up the product

7.1 Flushing the system

Instructions on flushing the system, including hygiene and safety precautions for drinking water.

7.3 Priming and venting the product

Step-by-step guide to filling and removing air from the pump and system.

7.4 Adjusting the diaphragm tank pressure

Procedure for checking and adjusting the precharge pressure in the diaphragm tank.

8. Control functions

8.1 Dry-running protection

Describes how the pump stops automatically to prevent damage from running dry.

8.2 Pressure switch

Details the function and adjustment of the pressure switch for dry-running protection.

9. Setting the product

9.1 Operating panel

9.2 Setpoint setting

9.3 Start;stop of pump

10. Servicing the product

11. Taking the product out of operation

12. Fault finding

13. Technical data