Need help?Do you have a question about the Grundfos CME and is the answer not in the manual?
General| Liquid temperature range | 0 °C to +60 °C |
|---|---|
| Maximum operating pressure | 10 bar |
| Series | CME |
| Frequency | 50/60 Hz |
| Max Pressure | 10 bar |
| Pump Type | Centrifugal |
| Material | Stainless steel |
| Applications | pressure boosting, irrigation |
| Pumped liquid | Clean water |
| Approvals | CE |
| Max Liquid Temperature | 60°C |
| Power Supply | 1-phase or 3-phase |
Instructions for protection against electric shock, indirect contact, and mains voltage transients.
Explains the standard control panel interface and its functions.
Explains how to set the desired setpoint for all control modes.
Describes possible operating modes: Normal, Stop, Min., Max., Manual, User-defined.
Provides recommended PI controller settings (Kp, Ti) for various control modes.
Guides users through setting up the pump for specific operating modes.
Default setpoint value depending on pump variant and sensor presence.
Default operating mode for different pump configurations.
Recommended fuse sizes for different motor power ratings and supply voltages.
Recommended fuse sizes for different motor power ratings and supply voltages.
Specifies voltage levels, hysteresis, cable type, and length for digital inputs.
Details current sinking capability, load types, and cable requirements for OC outputs.
To Next Page