English (GB)
51
13.32 Define Home display
This menu is only available in the advanced control
panel.
In this menu, you can set the Home display to show
up to four user-defined parameters.
Factory setting
See section 24. Factory settings.
13.33 Display settings
This menu is only available in the advanced control
panel.
In this menu, you can adjust the display brightness
and set whether or not the display is to turn off if no
buttons have been activated for a period of time.
Factory setting
See section 24. Factory settings.
13.34 "Store settings" (Store actual
settings)
Grundfos GO
In this menu, you can store the actual settings for
later use in the same pump or in other pumps of the
same type.
Advanced control panel
In this menu, you can store the actual settings for
later use in the same pump.
13.35 "Recall settings" (Recall stored
settings)
Grundfos GO
In this menu, you can recall stored settings from a
number of previously stored settings that the pump
then uses.
Advanced control panel
In this menu, you can recall the last stored settings
that the pump then uses.
13.35.1 "Undo"
This menu is only available in Grundfos GO.
In this display, you can undo all settings that have
been made with Grundfos GO in the current
communication session. Once you have recalled
settings, you cannot undo.
13.36 "Pump name"
This menu is only available in Grundfos GO.
In this display, you can give the pump a name. In this
way, you can easily identify the pump when
connecting with Grundfos GO.
Pump variant Define Home display
CME ●
CRE, CRIE, CRNE,
SPKE, MTRE
●
Pump variant Display settings
CME ●
CRE, CRIE, CRNE,
SPKE, MTRE
●
Pump variant
"Store settings"
(Store actual settings)
CME ●
CRE, CRIE, CRNE,
SPKE, MTRE
●
Pump variant
"Recall settings"
(Recall stored settings)
CME ●
CRE, CRIE, CRNE,
SPKE, MTRE
●
Pump variant "Undo"
CME ●
CRE, CRIE, CRNE,
SPKE, MTRE
●
Pump variant "Pump name"
CME ●
CRE, CRIE, CRNE,
SPKE, MTRE
●
To Next Page
Loading...
Need help?
General
