Grundfos CME User Manual

English (GB)
25
12.2 Menu overview for Grundfos GO
1)
Only available if an advanced functional module, type FM 300, is fitted.
2)
Only available if Grundfos GO is connected to a multipump system.
Dashboard
CRE, CRIE,
CRNE,
SPKE, MTRE
CME
Multipump
system
●●●
"Status"
CRE, CRIE,
CRNE,
SPKE, MTRE
CME
Multipump
system
"System mode" ●
2)
"Resulting setpoint" ●●
"Resulting system setpoint" ●
2)
"Actual controlled value" ●●●
2)
"Motor speed" ●●
"Power consumption" ●●
"Power cons., sys." ●
2)
"Energy consumption" ●●
"Energy cons., sys." ●
2)
"Acc. flow, specific energy" ●●●
2)
"Operating hours" ●●
"Operating hours, system" ●
2)
"Pt100/1000 input 1" ●●
1)
"Pt100/1000 input 2" ●●
1)
"Analog output" ●●
1)
"Analog input 1" ●●
"Analog input 2" ●●
"Analog input 3" ●●
1)
"Digital input 1" ●●
"Digital input 2" ●●
1)
"Digital in/output 3" ●●
"Digital in/output 4" ●●
1)
"Fitted modules" ●●
"Pump 1" ●
2)
"Pump 2" ●
2)
"Pump 3" ●
2)
"Pump 4" ●
2)

Grundfos CME Specifications

General

Liquid temperature range	0 °C to +60 °C
Maximum operating pressure	10 bar
Series	CME
Frequency	50/60 Hz
Max Pressure	10 bar
Pump Type	Centrifugal
Material	Stainless steel
Applications	pressure boosting, irrigation
Pumped liquid	Clean water
Approvals	CE
Max Liquid Temperature	60°C
Power Supply	1-phase or 3-phase