Grundfos CME User Manual

English (GB)
21
11.3 Menu overview for advanced control panel
11.3.1 Home
11.3.2 Status
1)
Only available if an advanced functional module, type FM 300, is fitted.
Home
CRE, CRIE,
CRNE, SPKE,
MTRE
CME
Multipump
system
●●●
Status
CRE, CRIE,
CRNE, SPKE,
MTRE
CME
Multipump
system
Operating status ●●●
Operating mode, from ●●●
Control mode ●●●
Pump performance ●●●
Actual controlled value ●●●
Resulting setpoint ●●●
Speed ●●●
Acc. flow and specific energy ●●●
Power and energy consumption ●●●
Measured values ●●●
Analog input 1 ●●●
Analog input 2 ●●●
Analog input 3 ●●
1)
●
1)
Pt100/1000 input 1 ●●
1)
●
1)
Pt100/1000 input 2 ●●
1)
●
1)
Analog output ●●
1)
●
1)
Warning and alarm ●●●
Actual warning or alarm ●●●
Warning log ●●●
Alarm log ●●●
Operating log ●●●
Operating hours ●●●
Fitted modules ●●●
Date and time ●●●
Product identification ●●●
Motor bearing monitoring ●●●
Multi-pump system ●
System operating status ●
System performance ●
System input power and energy ●
Pump 1, multi-pump system ●
Pump 2, multi-pump system ●
Pump 3, multi-pump system ●
Pump 4, multi-pump system ●

Grundfos CME Specifications

General

Liquid temperature range	0 °C to +60 °C
Maximum operating pressure	10 bar
Series	CME
Frequency	50/60 Hz
Max Pressure	10 bar
Pump Type	Centrifugal
Material	Stainless steel
Applications	pressure boosting, irrigation
Pumped liquid	Clean water
Approvals	CE
Max Liquid Temperature	60°C
Power Supply	1-phase or 3-phase