EasyManuals Logo

Grundfos CMBE User Manual

Grundfos CMBE
111 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
WARNING
Pressurised system
Death or serious personal injury
Depressurise the system before you
start any work on the product. The
pumped liquid may be scalding hot and
under high pressure.
Drain the system or close the isolating
valves on either side of the pump.
WARNING
Biological hazard
Death or serious personal injury
When servicing the product, only use
Grundfos original spare parts.
Cable requirements
DANGER
Electric shock
Death or serious personal injury
Comply with local regulations as to
cable cross-sections.
Use the recommended fuse size.
3. Product introduction
TM084222
CMBE is a high-efficiency compact booster suitable
for clean water supply and pressure boosting in
domestic and light commercial applications. It
keeps a constant pressure via the integrated speed
control.
3.1 Intended use
The product has been evaluated for use in indoor
installations with:
clean water
drinking water.
Only use the product according to the
specifications stated in these installation
and operating instructions.
Check local regulations.
8
English (GB)

Table of Contents

Other manuals for Grundfos CMBE

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Grundfos CMBE and is the answer not in the manual?

Grundfos CMBE Specifications

General IconGeneral
Flow RateUp to 6 m³/h
MaterialStainless Steel
Motor TypePermanent magnet motor
Liquid Temperature0°C to +60°C
Maximum Operating Pressure10 bar
Enclosure ClassIP55
Frequency50 / 60 Hz
Pump TypeCentrifugal pump
Power Supply1 x 200-240 V
ControlIntegrated Frequency Converter
Max Head60 m
Seal TypeMechanical seal
Motor Power0.3 - 1.5 kW

Related product manuals