TM043220
Example, CIM 250/260
Pos. Description
1 SCADA
2 GSM antenna
3 Mobile phone
4 CU 362 (CIM 250/260 built-in)
Related information
8.3.7 SMS numbers
8.3.8 SMS schedule
8.3.9 SMS heartbeat message
8.3.10 SMS authentication
8.3.11 GSM and SIM card settings
8.3.12 SCADA settings
8.3.13 Interlock settings
8.3.14 GPRS settings
8.3.4
CIM 270/280 GRM (Grundfos Remote Management)
The CIM 270/280 module is used to link with Grundfos Remote
Management.
When CIM 270/280 is installed in the system, several settings have
to be made before CIM 270/280 is ready to communicate with the
(Grundfos Remote Management) systems.
Submenus
SMS numbers
SMS schedule
SMS heartbeat message
SMS authentication
GSM and SIM card settings
Interlock settings
GPRS settings
For the submenus, see the relevant sections with the same titles.
TM043219
Example CIM 270/280
Pos. Description
1 GRM WebAccess
2 GRM server
3 GSM antenna
4 Mobile phone
5 CU 362 (CIM 270/280 built-in)
Related information
8.3.7 SMS numbers
8.3.8 SMS schedule
8.3.9 SMS heartbeat message
8.3.10 SMS authentication
8.3.11 GSM and SIM card settings
8.3.13 Interlock settings
8.3.14 GPRS settings
8.3.5
Ethernet
The web server of CU 362 makes it possible to connect a computer
to CU 362 via an Ethernet connection (Ethernet crossover cable).
The user interface can thus be exported from CU 362 to a computer
so that CU 362 and consequently the Dedicated Controls system
can be remotely monitored and controlled.
CU 362 can communicate with a PC via a local Ethernet connection
or via an internet connection. See the figures below.
TM043218
Example, local Ethernet connection
49
English (GB)
To Next Page
Loading...
