Need help?Do you have a question about the Grundfos CU 3 2 Series and is the answer not in the manual?
General| Type | Control Unit |
|---|---|
| Manufacturer | Grundfos |
| Frequency | 50/60 Hz |
| Max Current | 16 A |
| Category | Control Unit |
| Housing Material | Plastic |
Explains function of green and red indicator lights.
Lists and describes the terminals on the back of the unit.
Specifies conditions for use in potentially explosive environments.
Explains the coding system for unit identification.
Specifies suitable locations for unit installation.
Defines the required enclosure class for protection.
Details conductor sizes for the unit's terminals.
Specifies the minimum cable rating required.
Outlines cybersecurity measures and network connection guidelines.
Describes internal communication via the GENIbus system.
Information on connecting to external networks via CIM modules.
Step-by-step guide for installing a CIM module.
Specifies the required supply voltage and frequency.
Indicates the maximum power consumption of the unit.
Requirements for installing circuit breakers according to regulations.
Specifies the maximum rating for backup fuses.
Details fuse requirements for short-circuit protection.
Electrical characteristics of digital inputs.
Electrical characteristics of analog inputs.
Specifications for digital outputs and relay contacts.
Defines suitable conductor types and sizes for connections.
Specifies the type of USB port available on the unit.
Information on connecting and using a battery for backup power.
Identifies and describes terminal groups and their insulation.
Instructions for replacing the CIM module.
To Next Page
