TM078739
Run configuration wizard again
8.6.2 Display language
The CU 362 display language is selected in this display.
Path: Settings > General settings, CU 362 > Display language
TM078740
Display language
8.6.3 Units and frequency
In this display, it is possible to select the unit standard for the
various parameters.
As basic setting, it is possible to select SI or US units. It is also
possible to select other units for the individual parameters.
The unit of measurement has no influence on the data seen, for
example, in the SCADA system.
Path:
Settings > General settings, CU 362 > Units and frequency
TM078741
Units and frequency
Possible settings
Parameter
Basic setting
Optional units
SI US
Level m ft m, cm, ft, in
Flow rate
m
3
/h
gpm
m
3
/s, m
3
/h, l/s, gpm, yd
3
/s,
yd
3
/min, yd
3
/h
Volume
m
3
gal
l, m
3
, gal, ydv
Specific energy
kWh/m
3
kWh/gal
J/m
3
, kWh/m
3
, Wh/gal, Wh/
kgal, BTU/gal, hph/gal
Temperature °C °F K, °C, °F
Power kW hp W, kW, MW, hp
Energy kWh kWh J, kWh, BTU, HPh
If units are changed from SI to US or vice versa, all
individually set parameters will be changed to the basic
setting in question.
8.6.4 Date and time
In this display, date, time and date-time format are set.
The real-time clock has a built-in rechargeable power supply which
can supply the clock for up to 20 days if the power supply to the CU
362 is interrupted.
If the clock is not powered for more than 20 days, the date and time
must be set again.
Setting range
The date can be set as day, month and year.
The time can be set as a 24-hour clock showing hours and minutes.
There are three formats:
Examples of format
2008-06-27 13:49
27-06-2008 13:49
6/27/2008 1:49 pm
Factory setting
Local time.
If the system has not been powered for more than 20 days
since it left the factory, the clock may have returned to the
original setting: 01-01-2008 0:00.
Date and time may have been changed during the setting
of CU 362.
There is no automatic changeover to/from daylight-saving
time.
Path: Settings > General settings, CU 362 > Date and time
TM078742
Date and time
65
English (GB)
To Next Page
Loading...
