IMpress GLYCOL
Overview.
The IMPRESS GLYCOL model is an enhanced version of the IMPRESS ADVANCED
with some additional Hardware and Software.
At-a-Glance
The noticeable differences are that the
GLYCOL version has a SNOWFLAKE on
the face of the Control Panel Decal, and
two additional grey M16 Cable-Glands
fitted to the enclosure. On Power-Up the
display identifies with the word GLYCOL.
Cable-Entry
Facilities for Cable Entry have been much expanded to keep abreast of additional Alarm,
BMS/Telemetry and Communications features. The Bottom of the Control Box is provided
with two additional grey M16 Cable Glands and FOUR additional knock-outs for M12
Control Panel (Base View) GLYCOL Version
M12 Cable-Gland
(Water-Low Sensor)
2 x M12 Knock-Outs
2 x M16 Knock-Outs
Available for use as desired
M12 Cable-Gland
(Pressure Transducer)
M16 Cable Gland
Power Entry
M16 Cable Gland
Pump-B Supply
M16 Cable Gland
Pump-A Supply
M16 Cable Gland
Pump-C Supply
(Dosing Pump)
M16 Cable Gland
Pump-C Alarm
(Dosing Pump Alarm Cable)
é
é
é
and M16 Cable Glands.
To Next Page
Loading...
