DECLARATION OF CONFORMITY
We, Grundfos, declare under our sole responsibility that the Impress and Impress
Advanced, Glycol and Twin Circuit pressurisation units referenced in these installation
instructions, to which this declaration relates, are in conformity with the:
Machinery (89/392/EEC), EN292
Electromagnetic Compatibility (89/336/EEC), EN50 081-1 & EN50 082-2
Electrical equipment designed for use within certain voltage limits
(73/29/EEC), EN60 335-1 & EN60 335-2-51
If further details are required, please contact one of the Grundfos offices listed on the
back page of these instructions.
1
st
August 2007
Grundfos Pumps Ltd.
Grovebury Road
Leighton Buzzard
Beds.
LU74TL
GENERAL DATA
These installation, operation and maintenance instructions are given as a guide to
good practice in the installation, putting into service, operation and maintenance of
the Grundfos IMpress and IMpress Advanced, Glycol and H/C units. They do not contain
full service instructions , procedures for the continual service and operation of the unit.
The services of a qualified engineer should be employed to maintain and repair the module.
This I.O.M. manual may refer to components/functions not fitted to all units.
DELIVERY AND HANDLING
On arrival, inspect the unit(s) for signs of damage before signing the delivery note and
report any damage to the supplier within 7 days. The unit is supplied from the factory
on a wooden pallet suitable for handling with forklift equipment.
The weight and the size of the module may require the use of proprietary lifting
equipment in order to be handled safely.
WARRANTY
1. The Grundfos warranty covers all defects within the unit originating from faulty
workmanship and/or materials for a period of one year from the date of installation or
eighteen months from the date of despatch from the factory, whichever is sooner.
The warranty covers the replacement of any faulty parts and our labour cost to
replace the faulty parts. It does not cover the cost of removing, returning and refitting
the unit or any secondary losses arising from the failure.
2. Under no circumstances should faulty equipment be dismantled. Failure to comply
with this instruction could invalidate the warranty.
3. Defects arising from the incorrect installation, water containing debris, or harmful
chemicals, inadequate electrical protection, faulty ancillary equipment, lighting or
other circumstances beyond our control is not covered by this warranty.
Peter Reynolds, General Manager
Grundfos Pumps Ltd
To Next Page
Loading...
