CONFIGURE to access the COLD sub-section or SKIP SUB-MENU to bypass this section.
By selecting CONFIGURE and pressing the SET Button, you will then have access to the
following COLD CHANNEL options:-
Set Pressure
Pump A Hand-Off-Auto
Pump A Differential
Pump A Hold-Off (see Note A)
Pump-A Run-On (see Note A)
Pump A Cooldown (see Note A)
Pump B Hand-Off-Auto (see Note B)
Pump B Differential (see Note B)
Pump B Hold-Off (see Note A and Note B)
Pump-B Run-On (see Note A and Note B)
Pump B Cooldown (see Note A and Note B)
Pressure Low Alarm-On (see Note C)
Pressure Low Alarm-Off (see Note C)
Pressure High Alarm-On (see Note C)
Pressure High Alarm-Off (see Note C)
All of the above options operate in exactly the same way as they do on any other IMpress unit,
but they only affect the COLD channel operation.
HOT Set-Up:
Similarly to the COLD Set-UP, there are a number of Set-Ups that refer to the HOT only which
have been separated out for clarity into a separate sub-section. This sub-section (for the HOT) Is
accessed through the HOT SET-UP option. Select CONFIGURE to access the HOT sub-section
or SKIP SUB-MENU to bypass this section.
By selecting CONFIGURE and pressing the SET Button, you will then have access to the
following HOT CHANNEL options:-
Set Pressure
Pump C Hand-Off-Auto
Pump C Differential
Pump C Hold-Off (see Note A)
Pump-C Run-On (see Note A)
Pump C Cooldown (see Note A)
Pump D Hand-Off-Auto (see Note B)
Pump D Differential (see Note B)
Pump D Hold-Off (see Note A and Note B)
Pump-D Run-On (see Note A and Note B)
Pump D Cooldown (see Note A and Note B)
Pressure Low Alarm-On (see Note C)
Pressure Low Alarm-Off (see Note C)
Pressure High Alarm-On (see Note C)
Pressure High Alarm-Off (see Note C)
All of the above options operate in exactly the same way as they do on any other IMpress unit,
but they only affect the HOT channel operation.
Control Settings
To Next Page
Loading...
