EasyManua.ls Logo

Grundfos MAGNA3 E - Page 6

Grundfos MAGNA3 E
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Connect all cables in accordance with local regulations.
Make sure that all cables are heat-resistant up to 70 °C.
Install all cables in accordance with EN 60204-1 and EN 50174-2.
Intended use in the United Kingdom
Safety precautions for UK:
The product is not intended for use in any home appliance, home automation, home control system
or consumer product in the UK.
Pumped liquids
Observe local legislation regarding pump housing material.
Do not pump aggressive liquids.
Do not pump flammable, combustible or explosive liquids.
Radio communication
The radio part of this product is a class 1 device and can be used anywhere in the EU member states without
restrictions.
This pump incorporates a radio for remote control.
The pump can communicate with Grundfos GO and with other MAGNA3 pumps of the same type via the built-in
radio.
External connections
WARNING
Electric shock
Minor or moderate personal injury
Separate wires connected to supply terminals, outputs NC, NO, C and start-stop input from each
other and from the supply by reinforced insulation.
Make sure that all cables are heat-resistant up to 70 °C.
Install all cables in accordance with EN 60204-1 and EN 50174-2.
Connect all cables in accordance with local regulations.
6
English (GB)

Related product manuals