Need help?Do you have a question about the Grundfos SCALA Series and is the answer not in the manual?
General| Maximum Suction Lift | 8 m |
|---|---|
| System Pressure | 10 bar |
| Approvals | CE |
| Special Features | Dry-running protection, built-in check valve |
| Material | Stainless steel |
| Application | Domestic water supply |
| Power Supply | 1x230V, 50/60Hz |
Information intended for professional and non-professional users.
Explanation of danger, warning, and caution symbols used.
Explains symbols for instructions, warnings, tips, and advice.
Check product against order, voltage, and frequency.
Lists the items included in the product package.
Recommendations for pump placement and frost protection.
Considerations for designing the system for pump pressure.
Instructions for physical mounting and securing the pump.
Tips and methods to minimize noise from pump installation.
Illustrative examples of pump installation configurations.
Safe and compliant hookup procedures, including motor protection.
Procedure for filling the pump housing with liquid before operation.
Steps to initiate pump operation and initial checks.
Guide to adjusting the pump's outlet pressure setpoint.
Information on the initial operational phase for the shaft seal.
Precautions and care instructions for handling the pump.
Guidelines for storing the pump, including temperature and humidity.
Overview of the Grundfos SCALA2 pump components.
Specifies the approved applications for the SCALA2 pump.
Details on suitable and unsuitable liquids for pumping.
Information on the nameplate and type key.
Overview of the pump's control panel and buttons.
Explanation of the outlet pressure indicator lights.
Description of the LED indicator lights and their meanings.
Procedure to adjust the pump's outlet pressure.
How to prevent accidental changes to settings.
Advanced settings for installers, including self-learning.
Routine maintenance tasks for the pump.
Cleaning instructions for the pump's insect filter.
Checking and cleaning the non-return valves.
Procedure to unblock a seized pump shaft.
Steps to restart the pump after a period of inactivity.
Instructions for disconnecting and storing the pump.
Interpreting the pump's status lights.
Methods to reset alarms and restore normal operation.
Troubleshooting guide for common pump faults and remedies.
Temperature, pressure, and liquid limits for the pump.
Information on pipe connections.
Specifications for voltage, frequency, current, and power.
Physical measurements and weight of the pump.
Information on environmentally sound disposal and recycling.
To Next Page
