Need help?Do you have a question about the Grundfos SCALA1 5-55 and is the answer not in the manual?
General| Product Name | Grundfos SCALA1 5-55 |
|---|---|
| Category | Water Pump |
| Max Head | 55 m |
| Max Flow Rate | 5 m³/h |
| Inlet/Outlet Size | 1" |
| System Pressure | 10 bar |
| Enclosure Class | IPX4D |
| Pumped Liquid | Clean water |
| Frequency | 50/60 Hz |
| Max Pressure | 10 bar |
| Motor Type | Permanent Magnet Motor |
| Protection Class | X4D |
| Liquid Temperature | 0°C to 45°C |
| Inlet Pressure | 6 bar |
| Approvals | CE, EAC |
Safety warnings and symbols used throughout the manual for potential hazards.
Steps for connecting the pump to the power supply and motor protection details.
Guide for priming, starting the pump, and normal operating conditions.
Guide for initial setup and connection of the pump using the Grundfos GO Remote app.
Information on setting up and operating the SCALA1 as a twin booster system.
Instructions for starting the pump after a period of inactivity.
Diagnosing and resolving common pump faults using indicators and troubleshooting tables.
Troubleshooting common problems such as the pump not starting or not running.
Diagnosing electric shocks, twin system faults, and general fault resetting.
To Next Page
