EasyManuals Logo

Grundfos SCALA1 5-55 User Manual

Grundfos SCALA1 5-55
81 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #31 background imageLoading...
Page #31 background image
15.6 The pump performance is insufficient
Grundfos Eye
Indicator
light
Automatic
reset
Cause Remedy
- - Pump inlet pressure is too low. Check pump inlet conditions.
- - Pump is undersized.
Replace the pump with a
larger pump.
- -
Inlet pipe, inlet strainer or
pump are partially blocked by
impurities.
Clean the inlet pipe or the
pump.
- - Leakage in the inlet pipe. Repair the inlet pipe.
- -
Air in the inlet pipe or the
pump.
Prime the inlet pipe and the
pump. Check pump inlet
conditions.
15.7 The pump starts and stops too
frequently
Grundfos Eye
Indicator
light
Automatic
reset
Cause Remedy
- -
Leakage in suction pipe or
air in the water.
Restore the water supply or
repair suction pipe.
- -
A tap has not been closed
entirely after use.
Check that all taps have been
closed. See section Anti-
cycling.
- -
Minor leakage in the
system.
Check the system for leakages.
See section Anti-cycling.
31
English (GB)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Grundfos SCALA1 5-55 and is the answer not in the manual?

Grundfos SCALA1 5-55 Specifications

General IconGeneral
Product NameGrundfos SCALA1 5-55
CategoryWater Pump
Max Head55 m
Max Flow Rate5 m³/h
Inlet/Outlet Size1"
System Pressure10 bar
Enclosure ClassIPX4D
Pumped LiquidClean water
Frequency50/60 Hz
Max Pressure10 bar
Motor TypePermanent Magnet Motor
Protection ClassX4D
Liquid Temperature0°C to 45°C
Inlet Pressure6 bar
ApprovalsCE, EAC

Related product manuals