Need help?Do you have a question about the Grundfos Sololift2 CWC-3 and is the answer not in the manual?
General| Model | Sololift2 CWC-3 |
|---|---|
| Max Head | 8.5 m |
| Power Supply | 220-240V, 50Hz |
| Protection Class | IP44 |
| Tank Volume | 9 l |
| Discharge Pipe Diameter | 22/28/32/40 mm |
| Approvals | CE |
| Outlet Connection | 22/28/32/40 mm |
| Application | Wastewater lifting |
| Liquid Temperature | 1-50 °C |
| Inlet Connections | 36/40/50 mm |
Grundfos declares Sololift2 CWC-3 product conforms to relevant Council directives and standards for CE marking.
Do not lift by cable. Ensure product accessibility for maintenance and repair.
Product must be earthed; use an earth leakage circuit breaker for protection against earth fault currents.
Service by trained personnel only. Use original parts. Clean unit thoroughly before service to maintain warranty.
Procedure to free a stuck impeller/grinder using a screwdriver and checking for free rotation.
Steps to clear blockages in the pressure switch pipe and ensure the internal tube is clear.
Instructions to remove the motor-pump unit for tank inspection and cleaning to remove foreign objects.
To Next Page
