EasyManuals Logo

Grundfos Sololift2 CWC-3 User Manual

Grundfos Sololift2 CWC-3
19 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
English (GB)
13
10. Disposal
This product or parts of it must be disposed of in an
environmentally sound way:
1. Use the public or private waste collection service.
2. If this is not possible, contact the nearest
Grundfos company or service workshop.
8. Water from shower or
another appliance
connected to the lower
inlets drains off slowly.
Backflow from the
lifting station.
a) Non-return flap in inlet stuck,
does not open or does not close
sufficiently.
Check the non-return flap.
b) Hydraulics or grinder blocked. Check and clean the hydraulics and
grinder.
c) The start level has changed. Check and clean the pressure switch
pipe.
d) Inlet pipe diameter is too small. Use a pipe with a larger diameter.
Fault Cause Remedy
Subject to alterations.

Other manuals for Grundfos Sololift2 CWC-3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Grundfos Sololift2 CWC-3 and is the answer not in the manual?

Grundfos Sololift2 CWC-3 Specifications

General IconGeneral
ModelSololift2 CWC-3
Max Head8.5 m
Power Supply220-240V, 50Hz
Protection ClassIP44
Tank Volume9 l
Discharge Pipe Diameter22/28/32/40 mm
ApprovalsCE
Outlet Connection22/28/32/40 mm
ApplicationWastewater lifting
Liquid Temperature1-50 °C
Inlet Connections36/40/50 mm

Related product manuals