Declaration of conformity
18
— Machinery Directive (2006/42/EC).
Standard used: EN 809:1998 + A1:2009.
— Low Voltage Directive (2006/95/EC). Applicable when the rated
power is lower than 1.5 kW.
Standards used: 60335-2-41:2003 + A1:2004 + A2:2010, except
sections 25.1 and 25.8.
— Ecodesign Directive (2009/125/EC).
Water pumps:
Commission Regulation No 547/2012.
Applies only to water pumps marked with the minimum efficiency
index MEI.
See the pump nameplate.
Bare shaft pump
We, Grundfos, declare under our sole responsibility that the products SP,
to which this declaration relates, are in conformity with these Council
directives on the approximation of the laws of the EC member states:
— Machinery Directive (2006/42/EC).
Standard used: EN 809:1998 + A1:2009.
— Ecodesign Directive (2009/125/EC).
Water pumps:
Commission Regulation No 547/2012.
Applies only to water pumps marked with the minimum efficiency
index MEI.
See the pump nameplate.
— Before the pump is taken into operation, the complete machinery into
which the pump is to be incorporated must be declared in
accordance with all relevant regulations.
This EC declaration of conformity is only valid when published as part of
the Grundfos installation and operating instructions (publication number
98074911 1114).
Bjerringbro, 27th Marc h 2014
Svend Aage Kaae
Technical Director
Grundfos Holding A/S
Poul Due Jensens Vej 7
8850 Bjerringbro, Denmark
Person authorised to compile the technical file and
empowered to sign the EC declaration of conformity.
To Next Page
Loading...
