Grundfos UPM2 - Regulatory Standards and Data

41
Grundfos HVAC OEM
circulator pumps
Related Power input EN16 297 Standby Power input
P
1 rated
50% P
1 rated
EEI Part 3 P
L AVG
P
Standby
SOLAR PM2 145 87 W 44 W ≤ 0.23 ≤ 39 ≤ 1 W
SOLAR PM2 105 70 W 35 W ≤ 0.23 ≤ 30 ≤ 1 W
SOLAR PM2 85 57 W 29 W ≤ 0.23 ≤ 24 ≤ 1 W
SOLAR PM2 65 48 W 24 W ≤ 0.23 ≤ 21 ≤ 1 W
SOLAR PM2 45 26 W 13 W ≤ 0.23 ≤ 12 ≤ 1 W
Low Voltage Directive (2014/35/EU)
Standards used:
• EN60335-1:2012/AC:2014/A11:2014
• EN60335-2-51:2003/A1:2008/A2:2012
• EN62233:2008
EMC Directive (2014/30/EU)
Standards used:
• EN55014-1:2006/A1:2009/A2:2011
• EN55014-2:2015
• EN61000-3-2:2014
• EN61000-3-3:2013
Ecodesign Directive (2009/125/EC)
Commission Regulation (EC) No 641/2009
Commission Regulation (EC) No 622/20012
Standards used:
• EN16297-1:2012
• EN16297-2:2012
• EN16297-3:2012
EEI ≤ 0.23 (see individual data sheet or name plate).
The benchmark for the most ecient circulators is EEI ≤ 0,20.
GFMJC (UPMGEO variants)
GFMJD (UPM2 variants)
GFMJF (UPM2K variants)
Bjerringbro, 20st of April 2016
Preben Jakobsen
Technical Director – HVAC OEM
Grundfos Operations A/S
Poul Due Jensens Vej 7
DK-8850 Bjerringbro, Denmark
Person authorised to compile technical le and
empowered to sign the EC declaration of conformity.
97907090_0416_PM2_Solar_QG.indd 41 17-04-2016 21:48:39