Need help?Do you have a question about the Grundfos UPS and is the answer not in the manual?
General| Pump Type | Circulator Pump |
|---|---|
| Pump Housing | Cast Iron |
| Voltage | 230 V |
| Temperature Range | 2°C to 110°C |
| Maximum Operating Pressure | 10 bar |
Explains safety warnings, cautions, and notes associated with product symbols.
Details UPS/UPSD multi-speed circulator pumps, features, and types.
Lists suitable liquids and conditions for pump operation.
Information on using water/glycol mixtures with the pumps.
Explains the function of pumps with a standard terminal box module.
Describes the function of twin-head pumps with a relay module.
Recommended tightening torques for flanged connections.
Details permissible forces and moments on pump flanges.
Shows possible terminal box positions for single-head pumps.
Instructions for preventing frost damage when the pump is not in use.
Electrical connection for pumps with a standard module.
Electrical connection for pumps with a relay module.
Recommendations and warnings regarding frequency converter use.
Procedures for filling and venting the system before start-up.
How to change pump speed using the terminal box switch.
Troubleshooting for pumps with standard module.
Troubleshooting for pumps with relay module.
Details supply voltage specifications and variations.
Specifies ambient temperature and humidity limits.
Maximum and continuous liquid temperatures for different systems.
Details of the built-in thermal overload switch and its connection.
Guidelines for proper disposal of the product.
To Next Page