Need help?Do you have a question about the Grundfos UPE 25-40 and is the answer not in the manual?
General| Voltage | 230 V |
|---|---|
| Frequency | 50 Hz |
| Insulation Class | F |
| Enclosure Class | IP44 |
| Maximum Operating Pressure | 10 bar |
| Port-to-port length | 180 mm |
| Max Liquid Temperature | 110 °C |
| Housing Material | Cast Iron |
| Liquid Temperature Range | -10°C to +110°C |
Lists the types of liquids suitable for the pump, including water quality requirements.
Details orientations for terminal box based on pump model and insulation kit.
Step-by-step guide to reorienting the pump's terminal box for optimal installation.
Covers installation advice for non-return valves, air vents, and frost protection measures.
Crucial safety measures and precautions before performing electrical connections on the pump.
Illustrates the correct wiring for connecting the pump to the mains supply.
Ensuring the system is filled and vented before pump operation.
Steps to remove air from the pump to ensure proper operation.
Details the Proportional and Constant pressure control modes available for the pump.
Provides guidance on selecting the optimal control mode for various heating systems.
Overview of optional modules for enhanced control and communication capabilities.
Details the default pump settings for different UPE models.
Explains the buttons, light fields, and indicator lights on the pump's control panel.
Guides on adjusting the desired pump head using the control panel and indicators.
Instructions for using the R100 remote control for pump setup and monitoring.
A comprehensive guide to diagnosing and resolving common pump faults and issues.
Detailed steps for performing insulation resistance testing (megging) on the pump.
Comprehensive list of pump specifications including voltage, dimensions, and operating limits.
Guidelines for environmentally sound disposal of the product or its parts.
To Next Page