Grundfos UPE 65-120 User Manual

UPE Series 2000
UPE 50-120, UPE 65-120, UPE 80-120, UPE 100-60
Installation and operating instructions
Montage- und Betriebsanleitung
Instrukcja monta¢u i eksploatacji
Notice d’installation et d’entretien
Istruzioni di installazione e funzionamento
Instrucciones de instalación y funcionamiento
Instruções de instalação e funcionamento
√‰ËÁ›Â˜ ÂÁηٿÛÙ·Û˘ Î·È ÏÂÈÙÔ˘ÚÁ›·˜
Installatie- en bedieningsinstructies
Monterings- och driftsinstruktion
Asennus- ja käyttöohjeet
Monterings- og driftsinstruktion
GRUNDFOS INSTRUCTIONS

Grundfos UPE 65-120 Specifications

General

Pipe Connection	DN 65
Pump Housing	Cast iron
Model	UPE 65-120
Material	Cast Iron
Connection Inlet/Outlet	DN 65
Frequency	50 Hz
Approvals	CE
Power Consumption	24 - 325 W

Summary

General Description and Applications

Installation Procedures

Terminal Box, Nameplate, and Safety

Covers terminal box positions, nameplate adjustment, and safety considerations.

Electrical Connection and Supply

Wiring Diagram

Start-up and Function Overview

Control Modes and Selection

Explains available control modes and how to select them.

Control Mode Selection Guide

Pump Replacement Settings

Provides settings for replacing existing pumps with UPE Series 2000.

Pump Operation Modes

Curve Duty and Temperature Influence

Pump Indicators and Fault Signals

Indicator Lights and External Fault Output

Advanced Control Inputs

Analog, Forced Control, Panel Deactivation, Bus Communication

Remote Control and Pump Settings

Wireless Remote Control R100

Pump Setting Overview

Overview of pump settings including factory defaults and control panel operations.

OPERATION Menu Functions

Setpoint, Mode, and Fault Display

INSTALLATION Menu Settings

Control Mode, Min. Curve, Temp. Influence

Fault Finding Chart

Megging and High-Voltage Testing

Megging Procedure and High-Voltage Test

Technical Specifications Overview

Temperature, Leakage, Inputs/Outputs, Disposal