Need help?Do you have a question about the Grundfos UPE 32-80 and is the answer not in the manual?
General| Motor Type | ECM (Electronically Commutated Motor) |
|---|---|
| Pipe Connection | Flanged |
| Maximum Operating Pressure | 10 bar |
| Pump Housing | Cast iron |
| Enclosure Class | IP44 |
| Insulation Class | F |
| Connection Size | DN 32 |
| Power Supply | 230 V |
| Control Type | Proportional pressure, constant pressure, constant curve |
| Approvals | CE, EAC |
| Rated Voltage | 400 V |
| Pump Type | Circulator Pump |
| Head | Up to 8 m |
Provides an overview of the UPE Series 2000 circulator pumps and their integrated differential pressure control capabilities.
Guidelines for safely and correctly connecting the pump electrically according to local regulations.
Steps for initiating pump operation, including system filling and venting procedures.
Explanation of the two primary control modes: Proportional pressure and Constant pressure.
Details on the pump's control panel, its buttons, light fields, and indicator lights for status.
Step-by-step guide to setting the target pump head using the control panel and observing light field indicators.
How to clear fault indicators from the pump display, ensuring the cause is resolved.
Guide to the R100 remote control's menus (General, Operation, Status, Installation) for pump interaction.
A detailed guide to diagnosing and resolving common pump faults, their causes, and recommended remedies.
Essential technical data including electrical, mechanical, environmental, and performance specifications.
Specifications for inputs and outputs of expansion modules, including signal types and cable requirements.
To Next Page