Grundfos UPE 32-80 - R100 Remote Control Operation Guide; Navigating R100 Menus

19
7.4 R100
The pump is designed for wireless communication
with the Grundfos remote control R100. The R100
communicates with the pump via infra-red light.
During communication, the R100 must be pointed at
the pump control panel. When the R100 is communi-
cating with the pump, the red indicator light will flash
rapidly. The R100 offers additional possibilities of
setting and status displays for the pump.
The displays are divided into four parallel menus,
see fig. 31:
0. GENERAL, see operating instructions for R100
1. OPERATION
2. STATUS
3. INSTALLATION
The number stated at each individual display in
fig. 31 refers to the section in which the display is de-
scribed.
Fig. 30
Fig. 31
TM00 4465 3394
R100
3. INSTALLATION0. GENERAL 1. OPERATION 2. STATUS
7.5.3
7.6.2
7.6.3
7.6.5
7.6.4
7.7.4
7.7.3
7.6.6
7.7.1
7.5.2 7.7.2
7.6.17.5.1