English (GB)
10
5.5.2 Insulating shells
The insulating shells, which are tailored to the individual pump
type, can be ordered as accessories. It is easy to fit the insulating
shells around the pump.
5.5.3 Control box connections
The UPS3 control box has two electrical connections on one side:
the power supply and the control signal connection.
5.6 Power supply
The installer plug is supplied with the pump and is available as an
accessory.
Power cable adapters are also available as accessories.
5.6.1 Control signal connection
The control signal cable connection has three conductors: the
signal input, the signal output and the signal reference. Connect
the cable to the control box by a mini superseal plug. See fig. 11.
The optional signal cable can be supplied with the circulator as
an accessory.
The PWM signal connection is covered by a blind plug from the
factory. See fig. 10.
Fig. 10 Control signal connection
Fig. 11 Mini superseal plug
5.6.2 Cables and plugs
Pump type Product number
UPS3 15-50/65 99270706
TM07 0379 1518
TM06 58210216
To Next Page
Loading...
