43
ENGLISH
DETAILED CHANNEL SETTINGS
----------------------------------------------------
Searching for all digital
television channels from a
satellite automatically
New satellite channels are added or satellite
data is changed frequently. Therefore, we
recommend you to run auto search function from
time to time.
All transponders are scanned for new channels.
1 Open the »Input Source« menu with »
«.
2 Select »SATELLITE« using »
V
« or »
Λ
« and
confirm with »OK«.
3 Press »MENU« to open the menu.
4 Press »
<
« or »
>
« to select the »CHANNEL«
menu and press »OK« to confirm.
– »CHANNEL« menu is now enabled.
5 Select »Auto Tuning« with »
V
« or »
Λ
« and
confirm with »OK«.
– »Tuning Setup« menu will be displayed.
MENU ENTER
Tuning Setup
Back Start
Service Type All
Channel Type Free+Scramble
Scan Mode Default
Country Turkey
Satellite TURKSA...
6 In the »Tuning Setup« menu, select the
country from »Country« using »
<
« or »
>
«.
7 Select the »Satellite« option using »
V
« or
»
Λ
« and select the satellite you want to
search with »
<
« or »
>
«.
8 Select »Channel Type« using »
V
« or »
Λ
«.
Press »
<
« or »
>
« to select whether you
want to search for only free digital television
channels (Free), only scrambled digital
television channels (Scramble) or the both
(Free+Scramble).
Note:
7
If some of the frequencies are not stored
completely due the changes in satellite
parameters made by the broadcaster, it is
recommended to set the »Network Settings«
option to »Network«.
9 Select »Service Type« using »
V
« or »
Λ
«.
Press »
<
« or »
>
« to select whether you want
to search for only television channels (DTV),
only radio (Radio) or the both (All).
10 Press »OK« to start the search.
– The »Channel Tuning« menu will be
displayed and the search for TV channels
will start.
– Search may take several minutes
depending on the number of television
channels received.
Note:
7
The search can be ended prematurely with
»MENU«.
11 Press »MENU« to end the setting.
To Next Page
Loading...
