Battery Installation/ Replacement
1. Remove the battery cover from the battery compartment.
2. Install 3 “AA” size batteries so the + (positive) and - (negative) polarities match the polarities of the
battery compartment as indicated.
3. Replace the battery cover.
The battery cover will be closed tight when you hear a clicking sound.
• Do not use rechargeable batteries.
• Use three identical 1.5V alkaline batteries type AA/LR06.
• Replace both of the batteries if the symbol of low battery appears on the
display.
• Never leave any low battery in the battery compartment since they may leak
and cause damage to the unit.
• Disposal of used batteries should be carried out in accordance with the
national regulations for the disposal of batteries.
Adjusting Settings
1. To Set Year
1.1 All information will appear when the batteries are installed at the first time. After
2 seconds the year flashes. Finally, press the “SET” button and continue with step 2.
871125208143.indd 6 14-03-18 14:53
To Next Page
Loading...