Grundig CDM 800 - Page 7

ENGLISH
25
Connections and controls on the back of the device
(behind the cover panel)
RL+ – Connections for loudspeakers supplied.
R = right channel, L = left channel.
● ● For winding up the loudspeaker cables.
FM BEAT CUT
STEREO 2 Switch for FM stereo or mono reception
1 and reducing interference while recording
MONO 0 MW radio programmes (Beat Cut).
OPTICAL OUT Audio signal output for copying a CD onto a
digital recording device.
AC
~ Mains socket for connecting the mains cable.
The only way to disconnect the device from the
mains supply is to pull out the plug.
OVERVIEW
____________________________________________
ANTENNAPHONES
R
E
M
O
T
E
C
O
N
T
R
O
L
S
T
A
T
I
O
N
R L
IMPEDANCE : 3.2 Ohm [Ω]
R
L
BEAT CUT
OPTICAL
OUT
= 2
= 1
= 0
STEREO =
MONO =
OFF =
FM