ENGLISH
33
Cleaning the CD unit
If the device is unable to scan CDs perfectly, use a standard,
commercially available cleaning CD to clean the laser optics.
Other cleaning methods may damage the laser optics.
Use a lint-free cloth for cleaning the CD and always wipe it from
the inside out in a straight line. Do not use cleaning agents for
conventional vinyl discs, nor any solvents or abrasive cleaners.
Technical data
This device is noise-suppressed according to the applicable EU directives.
This product fulfils the European directives 89/336/EEC, 73/23/EEC and 93/68/EEC.
This device conforms to the safety regulation DIN EN 60065 (VDE 0860) and therefore the interna-
tional safety regulation IEC 60065.
Do not open the hi-fi casing under any circumstances. No warranty claims are accepted for damage
caused by incorrect handling.
Caution:
Bi-directional data transfer as defined for ITE devices in EN 55022/EN
55024 is not possible.
USB transfer is not in itself an operating mode. It is only an additional
function.
INFORMATION_____________________________________
System
Power supply:
Operating voltage: 230 V~
Mains frequency: 50/60 Hz
Max. power consumption: 35 W
Power consumption in standby: ≤ 7 W
Amplifier unit
Output:
Sine wave power: 2 x 4 W, 1 x 15 W
Audio power: 2 x 6 W, 1 x 20 W
Receiver unit
Reception range:
FM 87.5 ...108.0 MHz
MW 522 ... 1620 kHz
CD unit
Frequency response:
20 Hz ... 20 kHz
Noise voltage ratio:
(wtd.) ≥ 70 dB
MP3 features
Albums and tracks:
Max. 400 tracks per CD, max. 255 tracks per
album
File system/file management:
ISO 9660 Level 1 compatible
Dimensions and weight
Device dimensions:
W x H x D 385 x 125 x 248 mm
Device weight: 5.8 kg
To Next Page