11
G2 REPORTER OWNER’S MANUAL
Storing Stations Manually
Select your desired station, press the tuning knob or the < >
button and rotate the Tuning Knob to select < Save >, then rotate
the Tuning Knob or the <
>, < > button to select memory
location from 1~50 in FM/SW mode or 1~25 in AM mode. Press
the Tuning Knob again to confirm.
Memory Locations:
FM/SW(manual storage): M1-M50
AM(manual storage): M1-M25
Listening to Stored Memory
1. After storing stations into memory, press the < > or < >
button with the memory address M01-M99 shown on the display
(next to the frequency) to select your desired station memory.
2. In radio mode, press the number on the keypad that corresponds
to a station’s memory number, then press the < > button to
the stored station.
Delete Single/All Memories
Press the Tuning Knob in radio mode, and rotate the Tuning Knob to
select either < Delete > or < Delete All > and press the Tuning Knob
again to delete single memory or all memories.
To Next Page
Loading...
