Grundig G2 REPORTER - Using as Loudspeaker (Line-In); Connecting Audio Devices via Line-In; Line-In Playback Operation

G2 REPORTER OWNER’S MANUAL
16
USE AS AN ACTIVE LOUDSPEAKER (LINE-IN)
Connecting the unit to other medias (MP3, voice recorder, etc.) with
the Line-in Cable, can increase the sound of the media connected.
1. Plug one end of the Line-in cable to the earphone jack of the audio
equipment, and the other end into the Line-in Port of the unit.
2. Turn on the unit and select < Loudspeaker > in < Main Menu >.
3. Press the < > button and select < Line Signal >.
4. Press the < > button to play.
5. Turn on the audio equipment.
6. Press the <
> or < > button to select volume level.
7. Press the <
> button to pause/restart.
8. Press the < > button to stop.