21
G2 REPORTER OWNER’S MANUAL
Alarm On/Off
Alarm Off: Select [Alarm Set] in Sys Set mode and press the Tuning
Knob to enter. [New] appears on the display. Press the
Tuning Knob again , [Normal Alarm, Power off, Power
on, Exit] appears. Rotate the Tuning Knob to select
[Power off], then follow the same steps in [Alarm Set].
NOTE: If the setting time of [Sleep Timer] is earlier than that of the
[Alarm off], the [Sleep Timer] has the priority.
Alarm On:
1. Select [Alarm On] under [New] in [Alarm set], follow the steps
of the normal alarm set. After confirming the time, rotate the
Tuning Knob to select [Yes], press it to confirm and enter the
following selections:
· Radio: Listens to the last radio station (when auto turned on)
· Music Audio: Plays the last music file (when auto turned on)
· Mic Record: Records via MIC (when auto turned on)
· Radio Record: Listens to the last recording radio station
(when auto turned on)
NOTE: 1. [Normal Alarm], [Power on] timer, [Power off] timer
settings share the same steps.
2. You can Activate/Deactivate/Delete/Reset the alarm by
pressing the Tuning Knob after selecting the particular
alarm in [Alarm Set] mode.
Alarm Symbol
Alarm Activated
Alarm Deactivated
To Next Page
Loading...
