G2 REPORTER OWNER’S MANUAL
18
LINE-IN RECORDING
1. Press POWER button to turn on radio.
2. Plug a line in source into the LINE-IN socket < >.
3. Press the MENU button < > and turn the tuning knob
to select LOUD SPEAKER.
4. Press the tuning knob.
5. Press and release the SET button <
SET
> until LINE-IN
sign appears.
6. Press the RECORD button < > to start recording.
7. Press the STOP button < > to stop recording.
TO PLAY LINE-IN RECORDING
Press the MENU button < > and turn tuning knob to select VOICE.
Press the tuning knob to get into the play mode.
Choose your recording with the SELECT buttons < >.
Press the PLAY button <
>.
SYSTEM SETTING
In < Main Menu > mode, rotate the Tuning Knob to select Sys Set,
press the Tuning Knob to enter below settings:
NOTE: Selection time for each step is about 5 seconds.
· Time set
· Date set
· Calendar Info
· Alarm set
· Backlight
· Language
· Sleep timer
· Power off mode
· Contrast
· Memory intro
· Firmware version
· Firmware upgrade
· Date format
· Time format
· Exit
Rotate the Tuning Knob to select your desired function, and press it
to enter; press the < > button to exit.
To Next Page
Loading...
