23
G2 REPORTER OWNER’S MANUAL
CONTRAST SETTING
Select [Contrast] in Sys Set mode and press the Tuning Knob.
The brightness level 0-16 appears on the display, rotate the Tuning
Knob to adjust, and then press the Tuning Knob to confirm and exit.
MEMORY INFO
Select [Memory Info] in Sys Set mode and press the Tuning Knob
to display the memory status.
DATE FORMAT
Select [Date Format] in Sys Set mode and press the Tuning Knob,
then rotate the Tuning Knob to select the belowing date format:
· yyyy mm dd
· mm dd yyyy
· dd mm yyyy
· Exit
Press the Tuning Knob to confirm selection or wait 5 seconds
to automatically cancel and exit.
KEY LOCK
To activate the locking function, push the < > button (on the left
side of the unit) according to the direction shown on the unit, and
the key lock symbol appears on the display; push it to the opposite
direction to deactivate.
NOTE: If the unit is locked, first check if there is the [ ] symbol
shown on the display, deactivate it before any operation.
To Next Page
Loading...
