Grundig G2 REPORTER - Page 19

19
G2 REPORTER OWNER’S MANUAL
Time Set
1. Select < Time Set > in Sys Set Mode by rotating the Tuning Knob.
2. Press the Tuning Knob and notice the hour-indicator flashes,
then rotate the Tuning Knob to adjust the hour; Press the
Tuning Knob and notice the minute-indicator flashes, then rotate
the Tuning Knob to adjust the minute; Press the Tuning Knob and
notice the second-indicator flashes, then rotate the Tuning Knob
to adjust second.
3. Press the Tuning Knob to confirm time setting.
Date Set
1. Select [Date] in Sys Set Mode.
2. Press the Tuning Knob to enter and notice the year flashes, rotate
the Tuning Knob or press the <
>, < > button to adjust
the year, press the Tuning Knob to confirm; then adjust the month
and date with the same methods.
3. Press the Tuning Knob to confirm.
Calender Info
Select [Calendar Info] in Sys Set Mode, press the Tuning Knob
to display the calendar information for few seconds.