Grundig G2 REPORTER - Radio Operations; FM Radio Mode; Band Selection (FM;AM;SW); Radio Menu Options

G2 REPORTER OWNER’S MANUAL
8
FM RADIO
In Main Menu, select FM Radio and press the Tuning Knob to
listen to FM.
FM Radio
Press the <
> button to enter either Radio or Music Mode.
Choose Bands
In Radio Mode, press the < > , < > or < > button
to select your desired band. The the top left corner of the display
will show the band you are listening to.
When listening to SW, press the < > button to change
< m > bands.
In Radio Mode, press the Tuning Knob or < > button to enter
radio menu. Rotate the Tuning Knob or press the <
>, < >
button to select either of the below functions:
Save: Manual store the station into memory from 1~50
Record: Select 129k/40k BPS direct radio recording
Delete: Delete single memory
Delete all: Delete all stored memory
ATS: Auto tunes and store all stations into memory
Normal Band: 87~108MHz
Japan Band: 76~90MHz
School Band: 64~108MHz
Open RDS: Press to Open/Close RDS
Update RDS time: Syn the RDS time to the unit
AM Spacing
Exit
NOTE: <Open RDS> and <Update RDS time> only appears when
using FM Radio;
<AM Spacing Switch> only appears when using AM Radio.