13
6 RADIO RECEPTION
6.1 Tuning to a station
There are three possibilities for tuning in to a station:
• Automatically - the stations are sought automatically.
• Manually - This is easy if the frequency of the station is
already known (e.g. from your radio and television guide).
• Directly - The easiest way to obtain a station if its frequency
is already known.
Automatic tuning
• Keep or (TUNING UP or DOWNI pressed down until the
frequency on the display changes continuously. Tuning will
stop automatically as soon as a station is found. ¡P
• Repeat this until you have found the desired station.
Manual tuning
• Keep or .pressed down until you come close to the
desired frequency.
• Then briefly press the other button (/ ); tuning will stop.
• Then press or repeatedly until you reach the desired
frequency.
Direct selection
• When POWER is switched ON, press FREQ..
• The frequency disappears from the display.
• You can now enter the station's frequency with the 1...0 keys.
• Confirm the entry by pressing FREQ. once more.
• If you insert an invalid frequency, the display shows 'Err '
• Repeat the steps above, making sure the frequency is correct.
To Next Page
Loading...
