Grundig G2000A - Preset Radio Stations

14
6.2 Preset radio stations
You can program 20 stations into the memory, 5 on each waveband.
Programming
• Press POWER button to switch on the radio.
• Tune to a radio station automatically, manually or directly.
• Press the MEMO/TIME SET button. The 'MEMO' sign starts
flashing on the display.
• Press the preset button (1...5) to store the selected station.
• Press MEMO/TIME SET button again to complete the storing
procedure.
• The program indicator "MEMO" disappears from the display,
and the preset number that was stored is shown in the right
corner of the display.
• Repeat these steps for the other stations you wish to program.
Calling up preset stations
• Select the wave range with FM MW SW1 SW2 switch.
• Press one of the 1...5 buttons.
• The frequency and the PRESET number will appear on the
display: