16
8 ALARM
Alarm function
You can use your world receiver as an alarm clock. To use this
function you first have to set the alarm time. You will be woken with
a bleep, or by the radio.
Setting the alarm time
• Press MODE repeatedly until ALARM starts flashing on the
display.
• Press MEMO/TIME SET.
• The time digits start flashing.
• Use the H button to set the hours and the M button to set
the minutes (in the same way as the clock time).
• Press MEMO/TIME SET to store the setting
• If you do not press MEMO/TIME SET, the display will return
to the previous time setting after 5 seconds.
Selecting the alarm mode
• Use the RADIO/BUZZ switch to select the alarm mode.
Switching the alarm on
• Press ALARM.
• 'ALARM' and the symbol for the selected alarm mode( / ) will
appear on the display:
Switching the alarm off
• Press ALARM.
• The alarm signs will disappear.
• When the alarm sounds, you can also switch the alarm off by
pressing the POWER button.
To Next Page
Loading...
