5
2 Display
2.1 Display
The display provides information about the functioning of your world
receiver:
• While the radio is switched off, the current time will be
indicated. The first time it is used, or if the memory is erased,
‘0:00’ will appear on the display.
• When the radio is switched on, the frequency in kHz or MHz
and the wave band FM, MW, SW1 or SW2 will be indicated.
• When the alarm is switched on, the alarm mode(Alarm and
radio or buzzer) will be indicated.
• this indicator lights up when a certain station is
correctly turn to.
• indicates stereo reception for FM.
• Sleep indicates that the sleep time function is active.
• LOCK indicates that all buttons are locked.
• indicates that batteries should be replace.
• MEMO lights up when you are storing stations.
To Next Page
Loading...
