15
7 CLOCK
7.1 HOME/DUAL time display Priority
Your G-2000A allows you to set two different times: HOME and
DUAL. Normally, the HOME time has priority. You can also set the
DUAL time to be displayed constantly.
• The MODE button toggles the display between HOME, DUAL
and ALARM time indication. After 5 seconds, the display will
return to the previous indication.
• Press MODE once. The DUAL time appears and the DUAL
indication starts flashing.
• Press MEMO/TIME SET to display the dual time constantly.
• DUAL stops flashing.
• To display the home time constantly again, press MODE twice
and then MEMO/TIME SET while HOME is flashing.
7.2 Setting the current time (HOME or DUAL)
• Press MODE to set the display in HOME or DUAL time mode.
• Press MEMO/TIME SET.
• The time digits start flashing.
• Use the H button to set the hours and the M button to set
the minutes.
• A single press of the H or M button advances the setting
by 1 hour or 1 minute respectively. If the button is held
pressed, the setting advances rapidly.
• The minutes will not be carried over to the hours if, for
example, the minutes indication changes from '59' to 100'.
• Press MEMO/TIME SET to store the setting
• If you do not press MEMO/TIME SET, the display will return
to the previous time setting after 5 seconds.
To Next Page
Loading...
