15 / 52EN
Refrigerator / User Guide
15
EN
PT
Installation
2. Connect the faucet adaptor to the
water mains valve.
3. Attach the connector around the
water hose.
4. Attach the connector into the fau-
cet adaptor and tighten by hand /
tool.
5. To avoid damaging, shifting or ac-
cidentally disconnecting the hose,
use the clips provided to fix the
water hose appropriately.
A
WARNING: After turning
the faucet on, make sure
there is no water leak on eit-
her end of the water hose. In
case of leakage, turn the val-
ve off and tighten all connec-
tions using a pipe wrench or
pliers.
4.8. For products using
water carboy
(Optional)
To use a carboy for the product’s wa-
ter connection, the water pump re-
commended by the authorized service
must be used.
1. Connect one end of the water
hose provided with the pump to
the product (see 4.6) and follow
the instructions below.
To Next Page
Loading...
