Grundig Planixx CDP 4103 AS10 User Manual (English)

Questions and Answers:

V
Victoria YoungJul 31, 2025
Why is there no sound from my Grundig Planixx CDP 4103 AS10, or why is the sound quality poor?
- J
  jacksonericJul 31, 2025
  If you are experiencing no sound or poor sound quality from your Grundig CD Player, the issue could be due to several reasons: the volume may be turned down too low, so adjust it using the volume control on the device or remote. Also, the earphone plug might be loose or not properly connected, so check the connection. Finally, ensure the earphone plug is connected to the correct »PHONES« socket and not the »LINE OUT« socket.
T
Teresa MurphyAug 8, 2025
What to do if my Grundig Planixx CDP 4103 AS10 won't switch on, start playback, or show a display?
- M
  Melanie MillerAug 8, 2025
  If your Grundig CD Player isn't switching on, starting playback, or displaying anything, consider these potential causes: the batteries might be inserted incorrectly, so ensure they are properly placed. The batteries could also be flat, requiring replacement or recharging. Check if the »HOLD« switch is activated and, if so, deactivate it. Finally, verify that the mains adapter is correctly connected.
B
Benjamin ThomasAug 15, 2025
What to do if playback won't start, keeps getting interrupted, or there's no display on my Grundig Planixx CDP 4103 AS10 CD Player?
- S
  Stephen HubbardAug 16, 2025
  If playback on your Grundig CD Player won't start, is interrupted, or there is no display, it could be due to a few reasons. First, make sure the CD compartment is fully closed. Another potential cause is moisture on the lens; let the device sit in a warm room for a while. Also, check that the CD is inserted correctly with the label facing upwards. Lastly, the CD might be damaged or dirty, so try replacing or cleaning it.
T
Timothy MorrisAug 23, 2025
Why does my Grundig Planixx CDP 4103 AS10 CD Player not begin playback with the first track?
- A
  Amber HammondAug 23, 2025
  If your Grundig CD Player does not begin playback with the first track, it is possible that the PROGRAM or SHUFFLE function is activated. Deactivate the PROGRAM or SHUFFLE function.

Grundig Planixx CDP 4103 AS10 Specifications

General

Brand	Grundig
Model	Planixx CDP 4103 AS10
Category	CD Player
Language	English

Summary

SAFETY

Safety

General instructions to ensure long-term satisfaction and enjoyment of the device.

Maintenance

Instructions on cleaning the device and CDs to maintain optimal performance.

Environmental note

Information on packaging materials and proper disposal of batteries and packing.

OVERVIEW

Controls and connections on the side

Identifies and explains the function of controls and connection sockets on the side of the device.

Operating controls on the bottom of the device

Details the functions of controls located on the bottom of the portable CD player.

The remote control

Explains the functions of the buttons and controls on the remote control.

The display on the remote control

Describes the meaning of various indicators and text shown on the remote control's display.

POWER SUPPLY

Mains operation (with mains adapter)

Instructions for connecting and using the device with a mains adapter.

Battery operation

Steps for inserting and using standard batteries for portable operation.

Using Nickel-Cadmium batteries

Guide on charging and using rechargeable Nickel-Cadmium batteries.

PREPARATION

Connecting the earphones and the remote control

Instructions on how to connect headphones and the remote control to the CD player.

Adjusting the volume

Explains how to adjust the playback volume using the device and remote control.

Ultra Bass System

How to activate and deactivate the Ultra Bass sound enhancement feature.

Disabling the buttons

Instructions for locking and unlocking the device and remote control buttons to prevent accidental activation.

BASIC FUNCTIONS

Inserting a CD

Step-by-step guide on how to insert a CD into the player correctly.

Removing the CD

Instructions on how to safely remove a CD from the player.

Digital anti-shock system (DAS)

Explanation of the anti-shock system and how to switch it on or off.

CD playback

How to start, pause, resume, and stop CD playback.

Selecting a different track

Instructions for navigating between tracks on the CD.

Searching for a passage within a track

How to fast-forward or rewind within a track to find a specific part.

ADDITIONAL FUNCTIONS

Repeating a track

How to set the player to repeat a single track continuously.

Repeating the whole CD

How to set the player to repeat the entire CD continuously.

Playing the introductions of tracks on the CD

How to play the first ten seconds of each track on the CD.

Playing back tracks in random order

How to play tracks from the CD in a random sequence.

CREATING A TRACK MEMORY

Selecting and storing tracks

Guide on how to select and save specific tracks in a desired playback order.

Playing back the track memory

How to play the sequence of tracks stored in the memory.

Deleting the track memory

Instructions on how to clear the programmed track memory.

INFORMATION

Playback via a HiFi system

How to connect the CD player to a HiFi system for audio output.

Information

Details on compliance with EC directives, safety regulations, and laser product classification.

Technical data

Specifications for power supply, output, frequency response, noise voltage, and dimensions.

Troubleshooting

A table listing common problems, their possible causes, and recommended remedies.

Related product manuals

Grundig CDP 5100 SPCD

2 pages

Grundig SQUIXX CDP 4100

15 pages

Grundig SQUIXX CDP 4101 AS10

15 pages

Grundig CDP 9100 SPCD Mystixx

18 pages

Grundig Mystixx CDP 9200 SPCD

18 pages

Grundig SQUIXX CDP 4200 AS 45

15 pages

Grundig FREAXX 40 RRCD 4204 PLL

25 pages

Grundig RCD 1420 MP3

16 pages

Grundig FINE ARTS CD 9000

70 pages

Grundig FREEZZ 10 RRCD 4300

18 pages

Grundig Planixx CDP 4103 AS10 User Manual

Table of Contents

Questions and Answers:

Grundig Planixx CDP 4103 AS10 Specifications

Summary

SAFETY

Safety

Maintenance

Environmental note

OVERVIEW

Controls and connections on the side

Operating controls on the bottom of the device

The remote control

The display on the remote control

POWER SUPPLY

Mains operation (with mains adapter)

Battery operation

Using Nickel-Cadmium batteries

PREPARATION

Connecting the earphones and the remote control

Adjusting the volume

Ultra Bass System

Disabling the buttons

BASIC FUNCTIONS

Inserting a CD

Removing the CD

Digital anti-shock system (DAS)

CD playback

Selecting a different track

Searching for a passage within a track

ADDITIONAL FUNCTIONS

Repeating a track

Repeating the whole CD

Playing the introductions of tracks on the CD

Playing back tracks in random order

CREATING A TRACK MEMORY

Selecting and storing tracks

Playing back the track memory

Deleting the track memory

INFORMATION

Playback via a HiFi system

Information

Technical data

Troubleshooting

Related product manuals